Contact us for a detailed quotation and specifications sheet.
Send InquiryTell us your project · We respond within 24 hours
The UPSEN UHC600 is a tracked mobile impact crusher built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is 20-40 t/h, fed from a 2.5 m3 hopper and taking material up to < 300 mm at the inlet.
The unit travels as one load on a low-bed trailer — 5.5 m and 3.8 tons — and is driven by Deutz 54 kW, so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.
When specifying a tracked mobile impact crusher, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.
| Model | Capacity | Max. feed size | Total weight |
|---|---|---|---|
| UHC600 (this model) | 20-40 t/h | < 300 mm | 3.8 tons |
| UIC80 | 30-150 t/h | 500 mm | 24,000 kg |
| UJC106 | 150-300 t/h | 630 mm | 43,268 kg |
| UJC116 | 160-500 t/h | 650 mm | 52,500 kg |
Based on rated capacity, the following UPSEN units are usually specified together with the UHC600:
Rated capacity is 20-40 t/h. Actual output depends on the material, the feed size and the discharge setting.
The UHC600 accepts material up to < 300 mm.
3.8 tons, transport size 5.5 m. It can be moved on a standard low-bed trailer without dismantling.
Deutz 54 kW.
Yes — UPSEN machines are CE certified and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.
A single tracked unit rarely does everything — pair the UHC600 with the equipment below to build a working line.
