Contact us for a detailed quotation and specifications sheet.
Send InquiryTell us your project · We respond within 24 hours
The UPSEN UMS950 is a tracked mobile shredder built for continuous duty in quarrying, concrete recycling and demolition work. Its rated output is —, fed from a 2000×4300 mm hopper and taking material up to 2000×2500 mm at the inlet.
The unit travels as one load on a low-bed trailer — 11000×3250×3950 mm and 49,000 kg — and is driven by CUMMINS QSZ13-410 kW/550 HP, so no site power supply is needed. Steel tracks let the operator reposition the plant as the working face advances.
When specifying a tracked mobile shredder, always match the throughput of the crusher with the downstream screening and stockpiling equipment, and check the maximum feed size against the material you actually run. An oversized inlet wastes fuel; an undersized one causes bridging and blocked jaws.
| Model | Capacity | Max. feed size | Total weight |
|---|---|---|---|
| UMS950 (this model) | — | 2000×2500 mm | 49,000 kg |
| UFS750 | 20-150 t/h | 750 mm | 12 tons |
| UMS250 | — | 1200×1500 mm | 18,000 kg |
| UMS750 | — | 5100×2300 mm (Hydraulic lifting) | 28,000 kg |
Based on rated capacity, the following UPSEN units are usually specified together with the UMS950:
Rated capacity is —. Actual output depends on the material, the feed size and the discharge setting.
The UMS950 accepts material up to 2000×2500 mm.
49,000 kg, transport size 11000×3250×3950 mm. It can be moved on a standard low-bed trailer without dismantling.
CUMMINS QSZ13-410 kW/550 HP.
Yes — UPSEN machines are CE certified and leave the factory ready for work. Delivery is by sea (container or flat rack) to major ports.
A single tracked unit rarely does everything — pair the UMS950 with the equipment below to build a working line.
